FUOOTECH Group combined with Fangsheng is the top manufacturer of waste oil distillation & re-refining plant; Our plant can distillate & re-refine waste engine oil, waste gear oil, waste crankcase oil, waste hydraulic oil, tyre pyrolysis oil, plastic pyrolysis oil, rubber pyrolysis oil and other wastes fluids to diesel oil or base oil. Such plants have been exported to more than 40 countries and regions, and the 90% of orders are complete turnkey project.
In 2023, the 6th-generation waste oil regenerative distillation re-refining plant successfully developed by our company was perfectly combined with the most advanced anaerobic pyrolysis separation technology of hazardous waste which was developed at the same year, helps the waste oil regeneration ratio increased upto 99.9% max. (other company’s products only produce the around 70% of oils), therefore, our plant can bring more benefits to customers.
Specification
Parameters |
Unit |
Model Names |
||||||
FS-HDM-1 |
FS-HDM-2 |
FS-HDM-3 |
FS-HDM-4 |
FS-HDM-5 |
FS-HDM-6 |
FS-HDM-7 |
||
Treatment Capacity |
Tons/day (24 hours continuously) |
5 |
10 |
15 |
20 |
25 |
30 |
35 |
Oil Production Rate |
% |
More than 98% (along with our Anaerobic Pyrolysis Separation System of Hazardous Waste) |
||||||
Raw Materials |
|
waste engine oil, Tire/plastic pyrolysis oil, waste lube oil, waste motor oil, heavy oil, crude oil, etc |
||||||
Outputs |
|
Only Refined oil products & small quantity of Carbon powder (along with our Anaerobic Pyrolysis Separation System of Hazardous Waste) |
||||||
Avg. Power |
Kw/h |
55 |
66 |
95 |
135 |
180 |
230 |
280 |
Vacuum Degree |
Mpa |
≤-0.015~-0.1 |
||||||
Working Oil Temp. |
℃ |
175 ~ 550 |
||||||
Power Supply |
V |
110/ 220 /380 /415 / 440 V, 3Phase, 50Hz or as per request |
||||||
Noise |
db(A) |
≤80 |
||||||
Running Process |
|
Continuous |
FUOOTECH reserves the rights to any upgrading without notification.
THE MOST ADVANCED TECHNOLOGIESAND FEATURES ON FS-HDM PLANT:
1. Full-bridge Rectification Distillation Technology - a patented complete new distillation technology
2.Self-developed flocculant
3.Anaerobic Pyrolysis Separation System of Hazardous Waste - Increase the Oil Production Rate and Reduce the Wastes to Minimum
4.Self-developed main reactor material
5.Self-developed electromagnetic coil
6.Advanced catalytic adsorption systems
7.Waste gas (non-condensable gas) treatment system
8. Keep the carbon chain constant during the distillation process and only obtain the base oil or diesel oil by our special technology.
9.Multi Heating Way Available
10. Make full use of the reflux device to suppress the production of more light components so as to improve the recovery rate of final oils.
Anaerobic Pyrolysis Separation System of Hazardous Waste - Increase the Oil Production Rate and Reduce the Wastes to Minimum
①Pyrolysis is a technology with a long history. Wood, peat and most organic matter can be gasified and pyrolyzed. Depending on the chemical process used, pyrolysis is called carbonization, coking, gasification, and thermal decomposition.
②Hazardous waste is separated and processed into three states in an oxygen-free environment at <1000℃ by our special anaerobic pyrolysis separation equipment so as to reduce the quantity of wastes and pollution, meanwhile, increase the oil production rate.
③This system was developed to minimize the discharge of solid waste and liquid waste from industrial production. All organic waste can be processed through physical properties such as solid, liquid, vapor
and ignition points at different temperatures. This device carries out regeneration and comprehensive utilization and harmless or reduced emissions. This device can solve the problems of energy conservation and emission reduction in various industries and manufacturing industries.
④The traditional refining residue rate is about 30% and the oil content is about 70%, but the oil recovery rate (total amount) of our plant thanks to this technology is about 20% higher than that of other products (based on an annual output of 10,000 tons, our equipment can refine an additional 2,000 tons of refined oil than others).
⑤Adopting this technology, this parts can continuously operate safely for a long time at high temperatures below 1200 degrees (the eddy current control system, coils, main materials, and processes are all self-developed). This device will never form knots or trap dirt inside; The outdated products from other companies are facing the risk of explosion due to knots or trap dirt inside the tanks & pipelines.
There are only two things at the output by using this technology: 1. Refined oil products; 2. Carbon powder.
PROJECT CASES: