Oil Testing Machine
Oil Testing Machines are applied for testing the oil's related items to check if oil is qualified. Some are only for testing transformer oil, some are only for lube oil, and some are for testing petroleum.
-
FUOOTECH FOT-80 Oil Tester is for testing transformer oil's BDV value.
-
FUOOTECH FOT-100 Oil Tester is for testing transformer oil's BDV value.
-
Oil Density Measuring Equipment is designed and made as per national standard GB/T 1884-2000 "Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter methods)".
-
Our Automatic Oil Filling Machine is widely used for metering and quantitative filling of oils at site of PT and CT Transformers, and also can be used for online oil filling of transformer oil pillows and OLTC without bubbles.
-
FT-113G Copper Corrosion Tester
FUOOTECH's FT-113G Copper Corrosion Tester is designed and manufactured according to the requirements of SH/T 0232, ASTM D1838 Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gas.
-
FT-2010SD is applied for the detection for internal fault of oil gas equipment in electric power system, and analyze the cooling medium of hydrogen-cooled generator. It can analyze the dissolved gases (H2, O2, N2, CH4, C2H2, C2H4, C2H6, CO, CO2) in insulation oil by one time.
-
FT-041A Color Meter, also named as chroma tester, is designed and manufactured under the requirements of standard ASTM D1500 and SH/T0168 in ”Determination of chroma in petroleum products”. It’s applicable to the determination of the color in various lubricants, kerosene, diesel and other petroleum products.
-
SX-300 Octane and Cetane Analyzer
SX-300 Handheld Diesel Octane Number Cetane Number Tester are often used for on-site analysis of octane number of power gasoline, motor gasoline, corresponding to the motor method and research method (RON and MON), as wll as suitable for cetane number analysis of diesel fuels. In addition, the temperature of the analyzed liquid and the freezing point of diesel fuel
can also be measured. The measuring results are displayed on the LCD liquid crystal display.
-
Dielectric loss measurement is a very basic method in insulation testing, which can effectively detect the overall moisture deterioration and local defects of the insulation of electrical equipment. It is widely used in electrical manufacturing, electrical equipment installation, handover and preventive testing. The measurement of dielectric loss of transformers, transformers, reactors, capacitors, bushings, arresters, etc. is the basic method to measure their insulation performance.
-
DMG2671F High Voltage Insulation Tester or named Megohmmeter,Digital Megohmmeter Insulation Resistance Tester,High Voltage Insulation Resistance Tester etc. Specialize in laboratory or various of construction area. The instrument has the functions of LCD large screen gray-white backlight display, data storage, data reference and so on.
-
LWL-5 Online Particle Counter adopts the light blocking (Light Extinction) counting principle according to International Hydraulic Standards Committee, and is a necessary device specially used for on-site online measurement of oil contamination level.
-
The FUOOTECH’s FT-FPC Automatic Closed Flash Point Tester is designed and made as per the National Standard of People’s Republic of China GB/T261-2008; GB/T21615-2008; European standard ASTM-D93, it is an advanced analytical instrument, mainly used to determine the closed flash point of petroleum products.
