Coalescence Separation Oil Purifier Fuel Oil Purifier

Coalescence Separation Oil Purifier Fuel Oil Purifier

Model No.: PCS

FTY Vacuum Turbine Oil Filtration Machine is specally designed for purifying various unqualfied turbine oil (such as 1SO -VG-46, 32, 68, 100, etc.) from steam turbine system, gas turbine system & Fans, especially for serious emulsion turbine oil. It can quickly and ffciently break emulsification, separate water, gas, and particles from oil so that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely. Also it can purify low viscosity hydraulic oil and lube oil.

The PCS fuel

oil purifier machine

uses advanced "coalescing and separating" dehydration technology and "precision filtration" technology to effectively remove emulsified water, free water and particulate impurities in the oil. It is widely used in the dehydration, impurity removal and purification of light fuels with high water content (light diesel, gasoline, kerosene, etc.), turbine oil, hydraulic oil, lubricating oil, and low-viscosity and low-flash point oil.

Inquiry Now

Detailed Description

Inquiry Now

The PCS fuel oil purifier machine uses advanced "coalescing and separating" dehydration technology and "precision filtration" technology to effectively remove emulsified water, free water and particulate impurities in the oil. It is widely used in the dehydration, impurity removal and purification of light fuels with high water content (light diesel, gasoline, kerosene, etc.), turbine oil, hydraulic oil, lubricating oil, and low-viscosity and low-flash point oil.

Fuel Oil Purifier Machine Application Areas:

1.Purification of turbine oil and transformer oil

2.Dehydration and impurity filtration of hydraulic lubrication system oil

3.Access to hydraulic lubrication system to improve system cleanliness

4.Light fuel (diesel, gasoline, aviation kerosene, etc.)

Function:

1.Break all oil-water emulsion structures in the medium.

	2.Remove free water in the medium. The free water content of the treated medium is less than 100PPM, and can be less than 80PPM at the limit.  

	3.Filter out solid particles in the medium. Control the cleanliness of the oil to reach NAS level 6 or higher. 

Features:

1. It integrates the two functions of precision filtration and high-efficiency dehydration.

	2. No heating is required, which completely guarantees that the additives in the oil will not crack and deteriorate, and the quality of the oil after dehydration can be guaranteed, prolonging the service life of the oil.  

	3. Continuous processing with large flow rate, strong processing capacity and high dehydration efficiency.  

	4. The impurity filter is made of special stainless steel filter material and polymer adsorption material, with large filter area, high precision and large dirt holding capacity, which can effectively filter out large and fine particle impurities, so that the oil can be cleaned to a high degree Spend.  

	5. Low energy consumption and low freight costs.  

	6. The separated water is stored in the water storage tank. When the interface height reaches the set value, open the valve to discharge the water.  

	7. It can be set to automatically stop and drain when the pressure is too high, and it does not need to be guarded by personnel for long-term operation.  

	8. It has a perfect protection system. It can realize protection against overvoltage, undervoltage, wrong phase, motor overload and filter blockage. protect. 

Technical Parameter

Parameters	Unit	PCS-10	PCS-20	PCS-30	PCS-50	PCS-80	PCS-100	PCS-200	PCS-300
Flow rate	L/min	600	1200	1800	3000	4800	6000	12000	18000
Working pressure	MPa	≤0.3
Working noise	dB(A)	≤65-80
Running hours without malfunction	H	≥4000
Continuous running hours	H	≥150
Power Supply		AC 380 V, 50Hz, 3 Phase (or as per client’s requirement)
Filter Accuracy	μm	≤3
Water Content in the oil after Purification	PPM	≤100ppm
Cleanliness After Purification	NAS 1638	≤6
Power	KW	0.75	0.75	1.1	1.5	2.2	3	5.5	7.5
Dimension (L × W × H)	mm	700 ×570 ×550	700 ×570 ×600	700 ×600 ×650	850 ×650 ×750	900 ×650 ×800	1000 ×700 ×850	1100 ×750 ×950	1200 ×800 ×1000
Weight	Kg	108	120	130	145	170	185	200	230

Note: The dimension and weight will be changed with changing of technical specs.

FUOOTECH reserves the rights to any upgrading without notification.